Creative Collision in Oberlin, Kansas
We can replace your cracked windshield for you. When you bring your vehicle in for glass replacement it driven into the shop where the replacement will take place. The windshield wipers along with the cowl vent are removed. Side moldings are removed from the glass and the glass is cut out using a windshield glass tool.
Once the glass is cut out the technician removes the old urethane left on the glass opening and cleans it. The new glass is cleaned to remove all dirt and residue from moving the glass. A primer is laid on the edge of the glass and around the opening on the vehicle to promote adhesion. After the allotted dry time on the primer a bead of urethane is laid onto the glass opening and the new glass is set in. Making sure the gap is the same on both sides of the glass and it is where it is supposed to be next to the roof, it is time to secure the glass.
This process is quite simple as you apply firm pressure all around the glass, pressing down in all directions. Making sure the glass does not move. This forms a bond between the glass and the urethane to prevent it from leakage and it being able to be removed by driving and passing vehicles.
All moldings, the cowl vent and wipers are replaced. The replacement may only take a couple of hours but it takes several hours for the urethane to dry. It is important to let it dry for the required amount of time as this will make it air bag safe. We will have your vehicle most of the day.
Our Services
Collision Repair | Vehicle Body Paint | Vehicle Frame Straightening | Classic Car Restoration
Creative Collision Oberlin
Address:
1843 HWY 83 Oberlin, Kansas 67749
E-mail:
lolita@creativecollision-oberlin.com
Office: (785) 470-2130 | Cell: (785) 470-7630